A Barrett company - serving Homestead, FL
A living room with a wall of new windows and a sliding glass door
PGT · Homestead

PGT Construction Service in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
New double-hung windows in a dining room
A new front entry door with glass sidelights
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Homestead Homeowners Choose PGT Construction

We provide independent PGT construction service in Homestead: repair, re-glazing, re-sealing and full replacement of PGT impact windows, sliding glass doors and French doors, along with the roof work that surrounds them. Our crews work on PGT units every week, follow PGT’s published installation and anchoring specs, and know how these products behave in South Florida heat, salt air and wind-driven rain. Barrett & Sons Construction Homestead is an independent contractor; we are not PGT-authorized, and PGT does not endorse or warrant our work. The factory warranty on your unit stays with the unit and its original installation terms. Call (866) 344-6796 for a free estimate on PGT service in Homestead.

Call (866) 344-6796

Why Trust Barrett & Sons Construction Homestead for Your PGT Construction?

A new bay window with a cushioned seat

Our technicians have up to 28 years of experience, and a good share of that has been spent on PGT aluminum and vinyl units across Miami-Dade County. PGT hardware is not interchangeable with the generic hardware sold at box stores. WinGuard rollers, sash locks, glazing gaskets and weatherstripping are profiled to specific frame series, and a part that looks close usually is not close enough. We order PGT-spec or exact-match OEM components for the profile we’re working on, and we say so when a profile has been discontinued.

Warranty-safe practice matters here too. We don’t drill, shim or anchor in ways PGT’s installation instructions forbid, because doing that can give a manufacturer a reason to deny a claim later. We read the label on the unit, match the series, and photograph the existing anchoring and flashing before anything comes apart. If your home in Homestead has a mix of original 1990s PGT aluminum and newer WinGuard vinyl, we service both and tell you which one is worth keeping.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Fix in Homestead

These are the PGT issues we see most often in Homestead, and the reason each one happens.

  • Failed or shrunken glazing gaskets and perimeter sealant on WinGuard impact units. Years of UV and near-daily summer thunderstorms harden the sealant until it pulls away from the frame. Wind-driven rain then works past the frame and stains interior drywall, which owners often mistake for a roof leak.
  • Roller and track wear on WinGuard sliding glass doors. The panel drags, sits out of square and won’t latch. On a heavy impact slider, worn rollers and a track packed with grit and salt film do most of the damage, not the glass.
  • Corroded or loose anchor screws and failing sill pan flashing on aluminum frames. Salt air and hurricane-season rain attack fasteners and galvanized pans. Loose anchors change how the unit carries wind load, and that’s a structural concern, not a cosmetic one.
  • Fogged or leaking insulated glass units on vinyl WinGuard windows. The seal between panes fails and moisture clouds the cavity. The window is still weather-tight in most cases, but the visible fog is the tell that the glass unit needs replacement.
  • Sticking sashes from heat-driven frame expansion on vinyl units. A dark-colored vinyl frame in full Homestead sun expands enough that a sash binds in summer, then frees up in January. Sometimes the fix is adjustment; sometimes the opening was shimmed too tight at install.

A typical job starts when a homeowner notices a WinGuard slider that drags and won’t latch, or water staining at the interior corner of an impact window after a heavy storm. The usual cause is worn rollers and track on the slider, or failed perimeter sealant and a compromised sill pan on the window, not the glass itself. A qualified local pro pulls the panel, replaces the rollers and adjusts the track, re-seals and re-flashes the opening per PGT’s installation instructions, and confirms the unit still operates and latches as designed.

PGT Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

We use PGT-spec or exact-match OEM replacement rollers, gaskets, weatherstripping, latches and insulated glass units wherever the original profile is still available. For discontinued profiles, a quality aftermarket match is honest and serviceable, and we’ll tell you plainly when that’s the case. We don’t keep a warehouse of PGT parts sitting on a shelf in Homestead; parts are ordered to the specific unit we’ve measured, which is why the first visit is a diagnosis and the second is the repair.

Repair or replace comes down to the frame. If the frame is sound and square, repairing and re-glazing is usually the better spend, and you keep the unit. If the frame is corroded, racked, or the opening was never flashed correctly in the first place, replacement is the honest answer. We’ll show you what we’re seeing and give you the numbers both ways. Call (866) 344-6796 to set up a free second opinion on any written estimate you already have.

Our PGT Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact PGT series, check the label, and test operation of every sash and panel. We look at the gaskets, the sill pan, the anchoring and the sealant line, and we photograph it all before we touch anything. On impact units we also check that the glass mark still matches a Miami-Dade product approval, since that’s what the inspector looks for.
  2. 2
    Repair or install. For a repair, panels come out, rollers and hardware get replaced, and the opening gets re-sealed and re-flashed to PGT’s installation instructions. For a replacement, the rough opening is verified against the unit’s published dimensions, and the new unit is anchored and shimmed to spec.
  3. 3
    Test. We operate every window and door through a full cycle, confirm the latch engages square, and run a hose test on the exterior seal where the detail allows. On replacements, we schedule and pass the inspection that Miami-Dade requires, because a unit installed without the right approval can’t get a certificate of occupancy.
  4. 4
    Warranty and follow-up. You get the written scope, the part numbers, and our 90-Day Done Right Promise on the work. If a sealant line or a latch isn’t right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Products We Service & Install in Homestead

We work across the PGT families you’ll find on Homestead homes: WinGuard Aluminum impact windows and sliding glass doors, WinGuard Vinyl impact single-hung and horizontal slider windows, Sentinel by PGT impact French doors and hinged entry doors, plus the older aluminum non-impact single-hung and sliding windows still on plenty of pre-Andrew homes here. That range covers the 1980s and 1990s subdivisions rebuilt after Andrew as well as the newer builds on the western and southern edges of Homestead. If you’re not sure which series you have, we’ll identify it on site. Impact window installation, window replacement and roof repair are the three jobs we do most on PGT homes in Homestead.

We Also Service These Brands

PGT isn’t the only name we know. We service and install KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and Master Halco fencing, and the same crews handle windows, doors, kitchen and bath work across Homestead. If your project touches a brand we don’t list, ask. Premium-brand depth across trades is how we avoid the mystery-brand problem.

FAQs – PGT Construction Service in Homestead

A new concrete driveway with a paver border

Service Typical Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Repair $400 – $1,800
Roof Replacement $8,000 – $20,000

Call (866) 344-6796 for an exact quote; estimates are free.

Book Your PGT Service in Homestead, FL

Whether it’s a WinGuard slider that won’t latch, a fogged glass unit, or impact windows that need re-sealing before hurricane season, we’ll diagnose it honestly and price it in writing. Every price change comes as a written change order before work moves. Scope in writing, allowances in writing. Call (866) 344-6796 for a free estimate on PGT service in Homestead.

Written by the team at Barrett & Sons Construction Homestead.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 344-6796
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Barrett & Sons Construction Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch