







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose Toto Construction
We provide independent Toto service and construction in Homestead, FL. Our crews handle everything Toto touches in a home: Ultramax II and Drake II toilets that run at the tank, Washlet C5 units that stop heating, Aquia IV dual-flush cartridges that stick, and the bathroom remodels that have to accommodate all of it. Every job is scoped in writing, permits are pulled and inspections signed, and the finished work is backed by our written 90-Day Done Right Promise. Call (866) 344-6796 for a free estimate.
To be clear: we’re an independent Toto service provider, not affiliated with or authorized by Toto. We simply work on their products daily and build our process around what actually fails and what parts it takes to fix it. Homestead homes deal with high humidity and long hurricane seasons, and those conditions wear on bathroom fixtures and the assemblies around them faster than most manufacturers account for.
Why Trust Barrett & Sons Construction Homestead for Your Toto Construction?

Our technicians have up to 28 years of experience, and much of that time has been spent on Toto toilets specifically. The brand builds a genuinely good product, which actually makes service harder to get right. The parts are precise, the tolerances are tight, and a generic fill valve or a universal flush kit often fits poorly enough to shorten the life of the fixture. We know which components on a Toto need to come from the factory and which ones any quality supply house part will handle.
Barrett & Sons Construction was founded in 1998 and remains owner-operated. Tom Barrett and his sons are on-site most days. That matters for a Toto job because the diagnosis is the hard part. A Washlet that keeps running could be the control board, the wand assembly, or a supply issue, and the difference between the right call and the wrong one is hundreds of dollars for you. We carry premium brands across every trade we work, from KraftMaid cabinets to GAF roofing, and we treat Toto the same way: installed and serviced to spec, with OEM-compatible parts where they’re required. Every price change is a written change order before any work moves forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Homestead
These are the issues we see most often on Toto fixtures in Homestead homes. Some are wear and tear. Some come from our climate, and some from older plumbing that predates the toilets.
- Washlet C5 sensor and control board failures. The unit stops responding to the remote, or it runs continuously and won’t shut off. In a humid climate like ours, moisture intrusion into the electronics is a real contributor, and the fix is usually control board or wand assembly replacement. It’s a repair, not a reason to toss the seat.
- Ultramax II and Drake II fill valve and flush tower wear. Mineral buildup from our water supply causes a weak flush, phantom running between flushes, or a bowl that won’t refill completely. A genuine Toto fill valve or flush tower kit resolves it in almost every case.
- Wax ring and closet flange seal failures. Slow leaks at the floor connection are common in Homestead’s older concrete-block and CBS homes, where cast-iron or aging PVC flanges sit under decades of use. Left alone, that leak rots the subfloor and the framing near it.
- Aquia IV dual-flush cartridge and handle sticking. The flush button loses its tactile feedback, or water runs constantly. The cartridge wears out and needs replacement and adjustment. It’s a small part with an outsized effect on your water bill.
- Washlet power and outlet conflicts. Many Toto Washlet installs need a GFCI outlet near the toilet. In older Homestead bathrooms, adding one during a remodel is the moment to plan for it rather than discover the need after the tile goes in.
Toto Parts & Our Repair-vs-Replace Approach

We use genuine Toto OEM parts for flush towers, fill valves, and Washlet electronics. Those parts protect fit and performance, and they keep your warranty intact. For wax rings, supply lines, and standard install hardware, quality aftermarket parts are fine and cost you less. We don’t stock Toto parts locally; we source the right part per job, which means the first visit is diagnosis and the correct part comes in for the repair.
Repair or replace is a straight answer, not a sales pitch. If the Washlet board is available and the toilet body is sound, we repair it. If the body is cracked beyond saving or the model is obsolete enough that parts aren’t coming, we tell you and lay out the replacement cost in writing. We never push a full remodel when a targeted repair will do. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t work that way. If you’re weighing a targeted Toto repair against a larger bathroom project, call (866) 344-6796 for a free second opinion on any written estimate.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We isolate the actual failure. On a Washlet, that means testing the control board and water valve. On an Ultramax II, it means checking the fill valve and flush tower for mineral wear. We don’t guess at which part to replace.
- 2
Repair or install. We swap the specific failed component with the correct OEM part, or install the new Toto fixture to spec, checking the rough-in, flange, and supply connections while we’re in there.
- 3
Test. We verify water level, flush performance, and, on a Washlet, that heating and remote response work as they should. You see it working before we pack up.
- 4
Warranty. Every job is covered by our written 90-Day Done Right Promise. If something’s not right, one call brings us back.
A typical Toto service call, in general terms: a Washlet C5 that’s stopped heating or responding to the remote, or an Ultramax II that runs intermittently at the tank. A qualified local pro isolates the issue, replaces the failed component with the correct OEM part, and checks water level and flush performance. In many cases the repair is straightforward, and the toilet stays put. No walls get opened for a fill valve.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Homestead
We service the Toto lines Homestead owners actually have in their homes. That includes the Ultramax II and Drake II one-piece and two-piece toilets, the Washlet C5 and the wider Washlet family, and the Aquia IV dual-flush line. We also handle the plumbing and construction around those fixtures: full bathroom remodels, walk-in shower installation, and bathroom vanity installation. If you’re remodeling a bathroom and want to keep your Toto or upgrade to a new model, the fixture, the GFCI outlet placement, and the rough-in dimensions all get planned together rather than added on later.
We Also Service These Brands
We’re not a single-brand operation. The same crews who know Toto also handle KraftMaid cabinetry in a bathroom or kitchen build, Kohler fixtures when you’re comparing brands, GAF roofing, and PGT impact windows. If your project spans more than the bathroom, you’re working with one contractor who knows how the pieces fit.
FAQs – Toto Construction Service in Homestead

Is Barrett & Sons Construction Homestead authorized by Toto? No. We’re an independent Toto service provider and are not affiliated with or authorized by Toto. We work on Toto products daily and source genuine OEM parts through normal channels, but we make no claim of manufacturer partnership or authorization.
Do you use genuine Toto/OEM parts? Yes, for flush towers, fill valves, and Washlet electronics. Those parts protect fit and keep your warranty intact. For wax rings, supply lines, and standard install hardware, we use quality aftermarket parts to keep your cost down.
How long does Toto service take? Most repairs are a single visit, and when the correct part is on hand, the fix itself is often done the same day the part arrives. Diagnosing the exact component is the part that takes care of itself when the tech knows the model. Call (866) 344-6796 to schedule and we’ll give you a straight estimate.
What Toto models/series do you cover? The Ultramax II, Drake II, Washlet C5 and the broader Washlet family, and the Aquia IV dual-flush line are the most common. If your model isn’t listed, call and describe it; there’s a good chance we’ve worked on one.
Will service void my Toto warranty? Repairing a Toto with genuine OEM parts doesn’t void a warranty. Using the wrong parts or a botched install can, which is exactly why we use OEM where it matters and stand behind the work with our 90-Day Done Right Promise.
How much does Toto construction cost in Homestead? Toto-related construction costs depend on scope, not the brand of the fixture. A bathroom remodel in Homestead runs $9,000 – $28,000, a walk-in shower installation $4,500 – $12,000, and a bathroom vanity installation $800 – $3,000. Call (866) 344-6796 for an exact quote on your job; estimates are free, and we’ll put every number in writing.
| Service | Typical Cost in Homestead |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Book Your Toto Service in Homestead, FL
If you’ve got a Toto fixture that’s running, leaking, or has gone quiet, or you’re planning a Homestead bathroom remodel that needs to accommodate one, call Barrett & Sons Construction at (866) 344-6796 for a free estimate. A live person answers the phone, day or night. We’ll scope it in writing, pull the permits, and stand behind the work with our 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Homestead.












