







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Homestead: What to Know First
We install, replace, and repair PGT windows and doors for Homestead homeowners as an independent PGT service provider, and most jobs run two to five days from tear-out to final inspection. Impact glass is the standard here, not the upgrade: Miami-Dade and Broward product approval, a passing wind-load inspection, and the right anchor spacing matter more than the label on the frame. Our pricing is honest and upfront – a window replacement typically runs $4,500 – $15,000 and an impact window installation $8,000 – $25,000, with a written line-item quote before anything gets ordered.
This page is for people who already own PGT products or are specifying them for a Homestead home and want to know what actually goes wrong, what it costs to fix, and who will stand behind the work. Call (866) 344-6796 and a live person answers – not a voicemail box, not an out-of-state call center.
Key takeaways: Impact-rated PGT products are the local norm, spring and anchor failures matter more than cosmetic ones, and every price change reaches you in writing before work moves.
How PGT Products Fail – and How We Fix Them

PGT builds a good window. Most of what we repair in Homestead is installation or storm-related, not a product defect. Still, certain series fail in predictable ways, and knowing which one you have changes the fix.
- Stuck rollers and dragging panels on WinGuard sliding glass doors. The stainless track rollers flatten and the track fills with grit and sand blown in off open lots and fields. The door starts to bind, then someone forces it and the panel jumps the track. We replace the OEM roller set, true the track, and adjust the panel height rather than selling you a whole new door.
- Gasket shrinkage and water intrusion on WinGuard impact windows. The bulb and leaf seals pull back from the corners with years of sun and heat cycling. That’s where the water shows up first – a damp sill after a summer squall, not a broken pane. We re-gasket to OEM spec and reseal the frame perimeter, which keeps the water-management path intact and leaves the warranty in good standing.
- Lock and hardware wear on PGT aluminum and vinyl sliders. Mortise latches and keepers go out of alignment as the frame settles, so the window won’t latch clean. In a wind zone that’s a real problem, because the latch is part of the design pressure rating. We align the keeper, replace the latch, and confirm the reveal is square.
- Glass seal failure and fogging on older PGT insulated units. The dual-pane seal breaks and the unit fogs between the panes – a factory glass issue, not something a cleaning products or a re-caulk fixes. We order the correct replacement unit and set it with new setting blocks and proper edge clearance.
- Impact panel and frame shift from ground settling. South Florida soils move, and an impact window frame that was plumb can rack slightly, so the panel stops closing square. We reset shims, re-anchor where needed, and check the perimeter for caulk gaps before we call it done.
Two checkable details for PGT owners: a slider that binds low and drags at the top is almost always a worn roller and a settled panel, not a hogged-out track – people replace tracks they didn’t need. And PGT hardware is sized by series, so an aftermarket latch from a box store fits the hole and still misses the keeper. That’s the kind of thing that turns a $40 part into a callback.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
Here’s how a PGT job runs from the first call to the last piece of trim, on a real Homestead home.
- 1
Look at it and identify it. We read the glass stamp and the product label to confirm the series, glass make-up, and design pressure – not just “a sliding door.” That determines the parts and the fix.
- 2
Diagnose the cause, not the symptom. Is the roller worn, the panel settled, or the track out of plane? We test before we quote so the repair matches the real problem.
- 3
Parts decision, in writing. OEM or a quality aftermarket that meets spec, with the trade-off spelled out – cost, availability, and how it affects your warranty. Nothing ordered until you’ve seen the number.
- 4
Do the work. New setting blocks, correct shims, re-gasketing, re-caulking where it belongs. If it’s a replacement, permit pulled and inspection signed.
- 5
Test it like a storm is coming. Operate every unit, check the latch, hose-test the perimeter on a wet-install, and confirm it opens, closes, and locks the way it should.
- 6
Clean up and hand over the paperwork. Old materials hauled off, written change orders filed, and the 90-Day Done Right Promise on the contract – if something isn’t right, Tom comes back and makes it right on one call.
What PGT Windows & Doors Costs in Homestead

These are the ranges we see in Homestead, calibrated to the local market. Your written quote is the real number.
- Impact window installation: $8,000 – $25,000
- Standard window replacement: $4,500 – $15,000
What moves the price: the number of openings, impact glass versus standard, how many windows are second-story or over hardscape, whether the frames are concrete block or wood-framed, and whether the existing opening needs re-framing to match the new PGT product. A single roller or gasket repair runs far less than a replacement – a repair is often the right call, and we’ll tell you when it is.
Want a firm number? Call (866) 344-6796 for a free estimate. Every scope and allowance is on paper, and every price change arrives as a written change order before any work moves – no surprise invoices at the end.
See the difference
Before
After
Before
After
Before
AfterWhy Homestead Homeowners Call Barrett & Sons Construction Homestead for PGT Work
We’re the owner-operated alternative to the national outfits that quote one number on the phone and hand you a different bill at the door. We’ve been at this for over 29 years, founded in 1998, and Tom Barrett and his sons are on-site most days – this is not a franchise sending strangers. Our technicians have up to 28 years of experience, and every job carries the written 90-Day Done Right Promise. Tom publishes his name, his address, and his license number – look it up before you sign anything.
PGT is one product line we handle; we carry premium brands across the trades we touch – KraftMaid and Kohler indoors, GAF on roofs, Master Halco on fencing – so if your PGT job uncovers something else, the same crew that answers your call can handle it. Call (866) 344-6796 and you’ll get a live person, any hour of any day.
FAQs

Often yes, if the repair is done to spec with compatible parts and doesn’t alter the rated assembly. We’re an independent PGT service provider and not an authorized PGT dealer, so we’re careful to use parts that keep the assembly compliant and to document what we changed. Call (866) 344-6796 and we’ll walk through what your specific warranty allows.
Usually – PGT hardware is sized by series, and we can order the correct roller set, latch, or gasket for most current and recent lines. When OEM availability is slow, we quote a quality aftermarket that meets the same spec and spell out the trade-off in writing first. Call (866) 344-6796 for parts questions.
Repair is usually the smarter money for a worn roller, a bad gasket, a fogged unit, or a latch out of alignment – these are fixable for a fraction of replacement. Replacement makes sense when the glass or frame is damaged, the units are past their service life, or you need a higher design pressure. Call (866) 344-6796 for a free estimate and a straight answer on which way to go.
Yes – on any eligible job, the permit is pulled and the inspection is signed. The permit inspector works for you, not for us, which is exactly why we like him. Call (866) 344-6796 to schedule your free estimate.
A repair or two is typically a single visit; a full impact window or door installation usually runs two to five days depending on the count of openings and whether re-framing is needed. Your written scope lays out the timeline up front. Call (866) 344-6796 for a free estimate on your job.
Get a Free Estimate on Your PGT Project
Whether it’s one dragging slider or a whole house of impact windows, we’ll come out, identify what you’ve got, and give you the number in writing – scope, allowances, and change orders on paper before a nail moves. Call (866) 344-6796 to schedule your free estimate. $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount all stand on the table. Proudly serving Homestead and the surrounding communities for over 29 years.
Written by the team at Barrett & Sons Construction Homestead, serving Homestead and nearby areas.












